Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Replacing the main brushroll on your Shark ION Robot S87 will help it clean like when you first got it, as the brushroll can wear out over time. This guide can also be followed to remove your current brushroll to clean it rather than replace it.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

  1. Make sure device is turned off before attempting this replacement.
    • Make sure device is turned off before attempting this replacement.

    • Push clips in and push roller door upwards.

  2. Lift roller door out of brush roll housing.
    • Lift roller door out of brush roll housing.

  3. Remove the roller by pulling away from the motor and up.
    • Remove the roller by pulling away from the motor and up.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Trevor Davies

Üyelik tarihi: 14-01-2020

270 İtibar

2 adet Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 81