Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.
Giriş
The purpose of this guide is to show the steps necessary to replace the faulty DC power connector.
Neye ihtiyacın var
-
-
Use the plastic opening tool to remove the four rubber pads from the bottom of the device.
-
-
-
-
Desolder all three lead prongs.
-
Gently pull the DC power connector from the motherboard.
-
Neredeyse bitti!
To reassemble your device, follow the instructions in reverse order.
Sonuç
To reassemble your device, follow the instructions in reverse order.