Snowboard Binding Replacement

Loren Sunding ve 4 diğer katkıda bulunanlar

En son February 8, 2025 tarihinde güncellendi

10 dakika

Kolay

Öne Çıkan Öğrenci Kılavuzu

Giriş

1. adıma git

Snowboard bindings are easy to take apart and replace. In this guide we will show you how to replace a Union Force binding. Most snowboard bindings are very similar to remove, but there may be some slight differences.

Neye ihtiyacın var

Aletler

Phillips #2 Screwdriver
Ortaklık bağlantısı
Amazon tedarikçisinden satışta
Görüntüle

iFixit bu bağlantılar üzerinden satın aldığınızda komisyon kazanır.

Adım 1 Binding

Snowboard Binding Replacement, Binding: adım 1, 3 resimden 1.

Snowboard Binding Replacement, Binding: adım 1, 3 resimden 2.

Snowboard Binding Replacement, Binding: adım 1, 3 resimden 3.

Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.
Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner's manual.

Düzenle

Adım 2

Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.
The highback plate is the vertical support plate located on the heel side of the binding.

Düzenle

Adım 3

Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

Düzenle

Adım 4

Snowboard Binding Replacement: adım 4, 3 resimden 3.

Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.
Lift or slide the binding off the board and set the screws aside.

Düzenle