Giriş

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

Parçalar

Hiçbir parçaya gerek yok.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Yorum Ekle

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Yorum Ekle

Lift the cover up and off the device.
  • Lift the cover up and off the device.

Yorum Ekle

Locate the power supply.
  • Locate the power supply.

Yorum Ekle

Remove the belt connecting the power supply to the motherboard by pulling it out.
  • Remove the belt connecting the power supply to the motherboard by pulling it out.

Yorum Ekle

Remove the red, yellow, and black cable connecting the power supply to the hard drive.
  • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

Yorum Ekle

Remove the two 0.31 inch T-9 screws from the power supply.
  • Remove the two 0.31 inch T-9 screws from the power supply.

Yorum Ekle

Pinch the plastic plugs and lift the power supply up to detach from plugs. All 4 plugs must be detached to remove power supply.
  • Pinch the plastic plugs and lift the power supply up to detach from plugs.

  • All 4 plugs must be detached to remove power supply.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Phil Jones

Üyelik tarihi: 11-10-2011

41 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 üyesi

CPSU-AMIDO-F11S5G33

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Tüm Zamanlar: 1,042