Eşyalarını Tamir Et Topluluk Mağaza

Turtle Beach Ear Force XO Four Microphone Replacement

Giriş

This guide will exhibit how to replace the microphone board. Soldering is required to detach and replace the board, so refer to the soldering replacement guide for more information.

Neye ihtiyacın var

  1. Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: adım 1, 3 resimden 1. Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: adım 1, 3 resimden 2. Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: adım 1, 3 resimden 3.

    • Gently remove the foam pad from the microphone by pulling it apart.

    Düzenle

  3. Turtle Beach Ear Force XO Four Microphone Replacement: adım 2, 1 resimden 1.

    • Remove the PH0 7.1 mm screw from the back casing.

    Düzenle

  4. Turtle Beach Ear Force XO Four Microphone Replacement: adım 3, 2 resimden 1. Turtle Beach Ear Force XO Four Microphone Replacement: adım 3, 2 resimden 2.

    • Remove the back casing from the microphone.

    • Desolder the two wires from the back of the microphone. For instructions on soldering, please see iFixit's soldering guide.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

7 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Cody Barrett

Üyelik tarihi: 09/22/15

453 İtibar

2 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Baylor, Team 10-14, Williams Fall 2015 Baylor, Team 10-14, Williams Fall 2015 üyesi

BU-WILLIAMS-F15S10G14

3 Üyeler

8 adet Kılavuz yazıldı

Bir Yorum

I have a turtle beach recon 200 and there is no category here for it. I have gotten water into my microphone and I do not know how to fix it. My mic is attached to the headset. I have tried blowing into it and wiping it. None of that works. Please help.

Jacob Krantz - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 8

Her zaman: 8,927