Eşyalarını Tamir Et Topluluk Mağaza

VTech InnoTab 2S Headphone Jack Replacement

Giriş

Is the headphone jack on your device not working anymore? This guide will help you access and remove the headphone jack on your tablet.

Neye ihtiyacın var

  1. VTech InnoTab 2S Headphone Jack Replacement, Back Panel: adım 1, 1 resimden 1.

    • Turn your device to where the back panel is facing you.

    Düzenle

  2. VTech InnoTab 2S Headphone Jack Replacement: adım 2, 2 resimden 1. VTech InnoTab 2S Headphone Jack Replacement: adım 2, 2 resimden 2.

    • Lift the Leg all the way up and twist the bottom to remove.

    • Once the bottom part pops out the whole leg should just come off.

    • Remove any game cartridge from the device.

    Düzenle

  3. VTech InnoTab 2S Headphone Jack Replacement: adım 3, 3 resimden 1. VTech InnoTab 2S Headphone Jack Replacement: adım 3, 3 resimden 2. VTech InnoTab 2S Headphone Jack Replacement: adım 3, 3 resimden 3.

    • Remove all of the plastic tabs on the device. These are covering screws that will need to be removed.

    • These covers are made of hard plastic so they may be difficult to remove.

    • There is a special tab in the cartridge cover that is made of rubber, make sure to not break this tab.

    Düzenle

  4. VTech InnoTab 2S Headphone Jack Replacement: adım 4, 2 resimden 1. VTech InnoTab 2S Headphone Jack Replacement: adım 4, 2 resimden 2.

    • Remove all nine screws from the back of the device using a J0 bit.

    • Remove the small battery.

    Düzenle

  6. VTech InnoTab 2S Headphone Jack Replacement: adım 5, 2 resimden 1. VTech InnoTab 2S Headphone Jack Replacement: adım 5, 2 resimden 2.

    • Using a plastic opening tool, detach the backplate from the front piece.

    • Do not use excessive force. Double check that you removed all the screws if the panel is not coming off easily.

    • Once the backplate has been removed, you will have access to the circuit board.

    Düzenle

  7. VTech InnoTab 2S Headphone Jack Replacement, Motherboard: adım 6, 1 resimden 1.

    • First begin by removing the three cross-head screws using a J0 bit.

    Düzenle

  8. VTech InnoTab 2S Headphone Jack Replacement: adım 7, 1 resimden 1.

    • First remove the ribbon cables. There are two highlighted by the red squares

    • Do not apply too much pressure and make sure that the black plastic tabs are fully open before you pull the cable out.

    Düzenle

  9. VTech InnoTab 2S Headphone Jack Replacement: adım 8, 1 resimden 1.

    • Remove the camera from the assembly and put is a safe place so that it will not get damaged.

    Düzenle

  10. VTech InnoTab 2S Headphone Jack Replacement: adım 9, 1 resimden 1.

    • Remove the board from the main assembly.

    • Be careful not to pull too hard so that the cables aren't broken.

    Düzenle

  11. VTech InnoTab 2S Headphone Jack Replacement: adım 10, 1 resimden 1.

    • De-solder the points shown to fully remove the cables and free the board.

    • A soldering guide offered by IFIXIT can be found here Soldering Skills.

    Düzenle

  12. VTech InnoTab 2S Headphone Jack Replacement, Headphone Jack: adım 11, 1 resimden 1.

    • First use the solderer tool to desolder the two points boxed in red on the image.

    • A soldering guide offered by IFIXIT can be found here Soldering Skills.

    Düzenle

  13. VTech InnoTab 2S Headphone Jack Replacement: adım 12, 1 resimden 1.

    • Flip over the circuit board.

    • Using the metal tweezers, firmly grasp the headphone jack on either side and pull up to remove.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Esthevan Romeiro

Üyelik tarihi: 10/06/16

261 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

USF Tampa, Team 5-1, Lacy Fall 2016 USF Tampa, Team 5-1, Lacy Fall 2016 üyesi

USFT-LACY-F16S5G1

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 160