Eşyalarını Tamir Et Topluluk Mağaza

Wahl Chrome Pro Power Switch Replacement

Giriş

The power switch connects the device motor to the power cord. If the power switch becomes broken or worn, the device may not function properly.

Neye ihtiyacın var

  1. Wahl Chrome Pro Power Switch Replacement, Case: adım 1, 1 resimden 1.

    • Remove the two 5.0 mm JIS #1 screws to loosen the cutting blades.

    • Make sure your device is not connected to power before you begin.

    Düzenle

  2. Wahl Chrome Pro Power Switch Replacement: adım 2, 1 resimden 1.

    • Lift the bottom blade straight up from the device body to remove it.

    Düzenle

  3. Wahl Chrome Pro Power Switch Replacement: adım 3, 1 resimden 1.

    • Remove the three 9.0 mm JIS #1 screws attaching the base of the blade assembly to the body.

    Düzenle

  4. Wahl Chrome Pro Power Switch Replacement: adım 4, 1 resimden 1.

    • Lift the base of blade assembly straight up off of the body.

    Düzenle

  6. Wahl Chrome Pro Power Switch Replacement: adım 5, 1 resimden 1.

    • Remove the two 12.0 mm JIS #1 screws on the back of the device body.

    Düzenle

  7. Wahl Chrome Pro Power Switch Replacement: adım 6, 1 resimden 1.

    • Remove the 13.0 mm Phillips #2 screw on the side of the device body.

    • This screw is located on the opposite side of the body from the switch.

    Düzenle

  8. Wahl Chrome Pro Power Switch Replacement: adım 7, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Remove the spring on the side of the body using tweezers.

    Düzenle

  9. Wahl Chrome Pro Power Switch Replacement: adım 8, 1 resimden 1.

    • Pry the body case off of the device using a spudger.

    Düzenle

  10. Wahl Chrome Pro Power Switch Replacement, Power Switch: adım 9, 1 resimden 1.

    • Remove one 7.5 mm JIS #1 screw connecting the power cord to the switch base.

    Düzenle

  11. Wahl Chrome Pro Power Switch Replacement: adım 10, 1 resimden 1.

    • Remove one 7.5 mm JIS #1 screw connecting the wire to the switch base.

    Düzenle

  12. Wahl Chrome Pro Power Switch Replacement: adım 11, 1 resimden 1.

    • Remove the switch from device by lifting straight up from the device body.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Holly Dunn

Üyelik tarihi: 11/09/17

104 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

IUPUI, Team S7-G3, Baechle Fall 2017 IUPUI, Team S7-G3, Baechle Fall 2017 üyesi

IUPUI-BAECHLE-F17S7G3

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 500