Ana içeriğe geç

iPhone 8 LCD and Digitizer Replacement Girişe yapılan değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş
Cihaz
iPhone 8
Type
replacement
Thing
Screen and Digitizer
Title
iPhone 8 Screen and Digitizer Replacement
Introduction
Follow this guide to replace a bare bones screen on an iPhone 8. This guide includes transferring the Touch ID sensor, earpiece speaker, front camera assembly, and LCD shield plate from the original assembly.
If your replacement display already includes those parts, follow [https://www.ifixit.com/Guide/iPhone+8+Display+Assembly+Replacement/98255|this shorter guide instead].
In either case, '''it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.''' The solid state home button is paired to its original logic board by Apple, so replacing it will render it unusable.
Opening the iPhone 8 will damage the waterproof seals on the display. If you do not replace the adhesive seals, your phone will function normally, but will no longer be water-resistant.
Time Required Min
Tahmin yok
Time Required Max
Tahmin yok
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, [guide|93983|reapply the display adhesive|new_window=true] and follow these instructions in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%208|iPhone 8 Answers community] for troubleshooting help.
Author
Public
Hayır
Summary
Replace the screen and digitizer module for the iPhone 8.

Kılavuz Ön Koşulları

Aletler

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.

Parçalar

  • iPhone 8/SE 2020 Display Assembly Adhesive x1 added.

İşaretler

  • In Progress added.

Adımlar

Step #: 1
Önce
Sonra