Giriş Geçmişi: "Re-cap" and Electrically Overhaul a Direct Drive Turntable

Cihaz	Turntable
Type	technique
Title	"Re-cap" and electrically overhaul a direct drive turntable to fix speed issues.
Introduction	Direct drive turntables use sophisticated circuitry to control their brush-less DC motors. Over time these units can develop erratic speed issues due to leaky electrolytic capacitors, dirty contacts and potentiometers, cracked PCB solder joints, or faulty transistors and ICs. In most cases, speed issues can be fixed by cleaning potentiometers and switches. If this does not resolve your issue and your unit is over 20 years old, you may need to “re-cap” it, which entails replacing old and leaky electrolytic capacitors with new ones of the same value. If the speed issues still persist after cleaning contacts, replacing capacitors, and re-flowing cracked solder joints, you may have a faulty transistor or IC. This guide shows you how you can check and replace these parts as well.
Time Required Min	Tahmin yok
Time Required Max	Tahmin yok
Imageid	Önce Sonra
Difficulty	Difficult
Conclusion	To reassemble your device, follow these instructions in reverse order.
Author	Santaji
Public	Hayır

Kılavuz Ön Koşulları

• #1, empty idi, ancak şu anda Turntable Disassembly.

Aletler

Parçalar

İşaretler

Adımlar

Adım #: 1

Önce

Sonra

Adım #: 2

Önce

Sonra