Ana içeriğe geç

Giriş Geçmişi: How to Open Your Logitech MX Master 3

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş
Cihaz
Logitech MX Master 3
Type
technique
Title
How to Open the Logitech MX Master 3
Introduction
Use this guide to open a Logitech MX Master 3 for cleaning or repair.
Time Required Min
15 dakika
Time Required Max
30 dakika
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
***To reassemble your device, follow the above steps in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Logitech%20MX%20Master%203|Answers community] for troubleshooting help.
Author
Public
Hayır

Kılavuz Ön Koşulları

Aletler

  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Spudger x1 added.
  • Isopropyl Alcohol 70% x1 added.
  • Microfiber Cleaning Cloths x1 added.
  • Phillips #00 Screwdriver x1 added.
  • T5 Torx Screwdriver x1 added.

İşaretler

  • In Progress added.

Adımlar

Adım #: 1
Önce
Sonra