Ana içeriğe geç

Giriş Geçmişi: iPhone 13 Rear-Facing Camera Replacement

Düzenleyen: Kyle Smith

Düzenleme onaylandı tarafından Kyle Smith

Önce
Sonra
Değiştirilmemiş
Cihaz
iPhone 13
Type
replacement
Thing
Rear-Facing Cameras
Title
iPhone 13 Rear-Facing Cameras Replacement
Introduction
Use this guide to remove and replace the rear-facing cameras in the iPhone 13. All the camera modules are replaced as a single unit.
Time Required Min
1 saat
Time Required Max
2 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
***To reassemble your device, follow these instructions in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2013|iPhone 13 Answers community] for help.
Author
Public
Hayır

Kılavuz Ön Koşulları

Aletler

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • Spudger x1 added.
  • Safety Glasses x1 added.

Parçalar

  • Packing Tape x1 added.

İşaretler

  • In Progress added.

Adımlar

Adım #: 1
Önce
Sonra
Adım #: 2
Önce
Sonra
Adım #: 3
Önce
Sonra
Adım #: 4
Önce
Sonra
Adım #: 5
Önce
Sonra
Adım #: 6
Önce
Sonra
Adım #: 7
Önce
Sonra
Adım #: 8
Önce
Sonra