/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap

Giriş Geçmişi: LTT guide for building your own Router

Düzenleyen: Jacob Mehnert —

Düzenleme onaylandı tarafından Jacob Mehnert

Önce
Sonra
Değiştirilmemiş
Introduction
This video will cover how to create your own network router using any x86 computer, and an Intel-based NIC. This video was created by the [link|https://linusmediagroup.com|Linus Media Group] and can be found on the [link|https://www.youtube.com/c/LinusTechTips|LTT Youtube channel]. You can also find the original video [link|https://www.youtube.com/watch?v=zPmqbtKwtgw|here].
***Things you will need***
* An x86 computer with a 3rd generation PCIe slot - Typically this is any PC that has been manufactured within the past 10 - 15 years
* An Intel-based [link|https[Topic://www.ifixit.com/Device/NIC_ Card|NIC|new_window=true]] - They use a 4 port card, but as long as you have 2 ports then you should be fine
* An SSD (In place of your Hard Disk Drive) - 256 GB is recommended
* Either [link|https://www.pfsense.org/download/|PFSense] or [link|https://opnsense.org/download/|OpnSense] - OpenSense is a more user-comprehensive GUI
* A cheap multipart [[Topic:Network Switch|networking switch|new_window=true]] - A Netgear GS308 is a good inexpensive one
* A [[Topic:Wireless AP|Wireless Access Point|new_window=true]] or Mesh System
* A USB Drive for installing your Operating system