Ana içeriğe geç

Giriş Geçmişi: DJI Phantom 2 Vision Gimbal Housing Replacement

Düzenleyen: Dylan Ponder

Düzenleme onaylandı tarafından Dylan Ponder

Önce
Sonra
Değiştirilmemiş
Title
DJI Phantom 2 Vision Camera mountMount Replacement
Introduction
This is a guide on how to disassemble the camera mount on the DJI Phantom 2 Vision. You will only need a philips head screwdriver to complete this disassembly. When completing the disassembly make sure to clean any residue that may be surrounding the screws before beginning, as doing this will ensure no over or under-tightening of screws may occur. Also, make sure to verify the size of the screws if you plan on replacing them, they are 6mm.