Giriş Geçmişi: iPhone 16 Pro Max LiDAR Sensor Installation
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
| Cihaz |
|
|||||
| Type |
|
|||||
| Title |
|
|||||
| Introduction |
|
|||||
| Time Required Min |
1 saat
|
|||||
| Time Required Max |
2 saat
|
|||||
| Imageid |
Önce
Sonra
|
|||||
| Difficulty |
Moderate
|
|||||
| Conclusion |
|
|||||
| Author | ||||||
| Public |
Hayır
|
Aletler
- P2 Pentalobe Screwdriver iPhone x1 added.
- Tri-point Y000 Screwdriver x1 added.
- Phillips #000 Screwdriver x1 added.
- iFixit Opening Picks (Set of 6) x1 added.
- Suction Handle x1 added.
- Spudger x1 added.
- Tweezers x1 added.
- Hair Dryer x1 added.
- Isopropyl Alcohol (90% or Greater) x1 added.
- Coffee Filters or a lint-free cloth x1 added.
- Packing Tape x1 added.
- Heat Gun x1 added.
- iOpener x1 added.
- Clampy - Anti-Clamp x1 added.
İşaretler
- Prerequisite Only added.