Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Eric Arnold

Düzenleme onaylandı tarafından Eric Arnold

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the four (4) screws anchoring the power supply to the case with your T7 torx driver.
-[* orange] Remove the two (2) screws holding the power supply plug in place using your T6 torx driver.
+[* red] Remove the four (4) 4mm screws anchoring the power supply to the case with your T7 torx driver.
+[* orange] Remove the two (2) 4mm screws holding the power supply plug in place using your T6 torx driver.
[* icon_caution] Avoid disturbing the square of gray thermal paste centered on top of the power supply/heatsink.