Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Ashley Dale

Düzenleme onaylandı tarafından Ashley Dale

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the two 5.0 mm Phillips #1 screws to loosen the cutting blades.
+[* red] Remove the two 5.0 mm JIS #1 screws to loosen the cutting blades.
[* icon_caution] Make sure your device is not connected to power before you begin.