Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Jim Nugent

Düzenlenme reddedildi tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[title] Opening the joy-con
-[* black] Start off by unscrewing the 4 screws at the back using a Tri-Point Y00 Screwdriver.
+[title] Opening the Joy-Con
+[* black] Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
[* black] ***Carefully*** separate the two halves (be gentle, as you risk damaging the ribbon cables in the joy-con if you're rough with them), and unscrew the one phillips screw holding the rear shell in place.