Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Jim Nugent

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Opening the Joy-Con
-[* black] Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
+[* red] Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
[* black] ***Carefully*** separate the two halves of the Joy-Con. Be gentle—there are ribbon cables connecting them inside.
-[* black] Remove the single #00 Phillips screw holding the black plastic shell in place.
+[* yellow] Remove the single #00 Phillips screw holding the black plastic shell in place.