10. Adımdaki Değişiklikler
Düzenleyen: Elke Sanders —
Düzenleme onaylandı tarafından Elke Sanders
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Next up is to remove the print board, step 10 till 13 will explain how to do this. | |
| - | [* black] The print board is connected with 7 screws and 3 wires. |
| + | [* black] The print board is connected with 7 screws and 3 wires. These screws are situated on the right side of the gray board in the middle. |
| [* black] The flat gray wire is connected to two small motherboards. One of the motherboards is connected with one screw and the other is clicked in. | |
| [* black] Slide the first mother board out of its case and unscrew the one that is connected to the print board. |