Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Warning: do not insert the spudger or plastic card too deep underneath the battery. The display cable runs underneath the battery.
[* icon_note] Scroll down to the next step to see where the cable is.
[* black] Insert the flat end of a spudger as deep as the notch and carefully slide along the edge to cut the adhesive…
-[* black] Use a plastic card to cut the remaining adhesive on the left side underneath the battery.
+[* black] Use a [product|IF145-101|plastic card] to cut the remaining adhesive on the left side underneath the battery.