Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Blake Klein

Düzenleme onaylandı tarafından Blake Klein

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Using the screw driver with Phillips #00 head, remove the three 6mm screws from the hinge.
-[* orange] Continue using the same tool to remove the 2mm screw located in the plastic housing securing the motherboard fan into place.
+[* red] Remove the three 6mm Phillips #00 screws from the hinge.
+[* orange] Remove the 2mm Phillips #00 screw from the plastic housing securing the fan into place.