Panasonic Lumix DMC-GH3 LCD Hinge Cover Replacement 6 No'lu Adım Geçmişi

	[* black] Before I begin 3D modeling any part, I like to take the time to fully analyze the exterior construction and overall build of the item. The best way to do this is by looking at the seam lines, feeling around the part and looking for any imperfections.
-	[* black] ~~I find that picturing~~ the part in my head and analyzing how each geometric shape is attained through normal machining operations provides great assistance in the 3D modeling process. This gives me insight into how the part was machined into a mold, injection molded and mass produced.
+	[* black] Picturing the part in my head and analyzing how each geometric shape is attained through normal machining operations provides great assistance in the 3D modeling process. This gives me insight into how the part was machined into a mold, injection molded and mass produced.
	[* black] This is not a terribly big part, but the funky geometry could lead someone to 3D scanning the part to ease modeling.
	[* black] I chose to take a traditional approach and use a trusty pair of calipers, protractor and a set of drill bits. Ideally, one would use a radius gauge set and a pin gauge set, but those tools are quite pricey. The drill bits should suffice.