Panasonic Lumix DMC-GH3 LCD Hinge Cover Replacement 35 No'lu Adım Geçmişi

	[* black] To represent the changes in design, here's a cap cutaway on the exact model of the Lumix GH3 end cap and my newly revised design.
	[* blue] The blue zebra cross section represents a cross section of the OEM Lumix hinge cap.
	[* red] The red zebra cross section represents a cross section of my thick walled end cap.
	[* red] The cross sectional thickness of the walls on my end cap are 0.4in thick, where as the measured cross sectional thickness of the OEM lumix end cap is 0.0365in
	[* black] Three .STL files are attached to this guide.
	[* black] "lumix cap square R2" represents a square profile end cap with the same wall thickness as the OEM lumix end cap for greatest chance of compatibility across GH3 & GH4 cameras. This is the most tested end cap design.
-	[* black] "lumix cap beefy R3" represents a square profile end cap with thicker walls for greatest durability.
+	[* black] "lumix cap beefy R3" represents a square profile end cap with thicker walls for greatest durability. This may not fit all GH3 & GH4 cameras due to natural variation in assembly tolerances between batches of cameras.
	[* black] "lumix cap identical R2" represents an end cap as close to the original OEM end cap as possible.