3. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive. | |
| - | [* icon_reminder] If you're replacing your hard drive, transfer this sensor to the same position on the new drive. (Without the sensor connected, the machine will speed up fan speed to max). |
| + | [* icon_reminder] If you're replacing your hard drive, transfer this sensor to the same position on the new drive. |
| + | [* icon_note] Users have reported that without the sensor connected, the fans will run consistantly at maximum speed. |