Disable Auto Boot 1 No'lu Adım Geçmişi - iFixit

1. Adımdaki Değişiklikler

Düzenleyen: Carsten Frauenheim — 5 May 2021

Düzenleme onaylandı tarafından Carsten Frauenheim

: Önce
: Sonra
: Değiştirilmemiş

Adım Satırları

	[title] Disable Auto Boot
-	[* icon_note] Before starting this procedure, you must disable your Mac's *Auto Boot* feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide\|110034\|Use this guide] or follow the abbreviated instructions below to disable Auto Boot.
+	[* icon_note] Before starting this procedure, you must disable your Mac's *Auto Boot* feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide\|110034\|Use this guide] or follow the abbreviated instructions below to disable Auto Boot. ''This command may not work on all Macs.''
	[* black] Power on your Mac and launch *Terminal*.
	[* black] Copy and paste the following command (or type it exactly) into Terminal:
	[* black] *sudo nvram AutoBoot=%00*
	[* black] Press *[return]. If prompted, enter your administrator password and press [return]* again. ''Note: Your return key may also be labeled ⏎ or "enter."''
	[* icon_note] You can now safely power down your Mac and open the bottom case, without it accidentally powering on.
	[* icon_reminder] When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command:
	[* black] *sudo nvram AutoBoot=%03*