| - | [* black] Power down the printer and unplug all cables from the electronics module on the back. Remove 6 screws from its cover and put it away. |
|---|
| - | [* icon_note] Note that you don't need to remove the entire module from the printer, just its cover. Remove only screws indicated in the photo. |
|---|
| + | [* black] Power down the printer and disconnect all cables from the electronics module on the back. |
|---|
| + | [* green] Remove the cover by unscrewing the 6 screws and setting it aside. |
|---|
| + | [* icon_note] You do not need to remove the entire electronics module from the printer, only its cover. Remove only the screws indicated in the photo to access the mainboard. |
|---|