ZPrinter 650 Mainboard Replacement 8 No'lu Adım Geçmişi

	[title] First functionality test
	[* black] Now you should test if the new mainboard helped (i.e. if it really was the source of the fault). *Do NOT connect Ethernet cable at this point*, otherwise the printer will not boot.
	[* black] Connect a PS/2 keyboard and a monitor with VGA input to the appropriate connectors and turn the monitor on. Then plug in the power cord to the printer and turn it on. The mainboard should beep, show BIOS logo and then boot into printer firmware, similar to the second photo. Also, the small display at the front of the printer should work now.
-	[* icon_note] If you encounter problems, keep in mind it's like troubleshooting any normal PC - check loose for cables, bad power supply, faulty memory or HDD, BIOS errors etc.
+	[* icon_note] If you encounter problems, keep in mind it's like troubleshooting any normal PC - check for loose cables/connectors, improperly seated components, bad power supply, faulty memory, BIOS errors etc.
+	[* icon_note] The worst problem would be bad HDD, because it stores various calibration data for valves, rollers and other components which were uniquely tuned in the factory. I made a HDD image from one Zprinter 650 in Acronis, but it probably won't work very well in another printer.
+	[* icon_note] Nevertheless, I'm willing to provide you with my HDD image if you really need it. Contact me in that case.