Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Rod Bland

Düzenleme onaylandı tarafından Rod Bland

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[title] Remove the rubber RAM stabilisers
+[title] Remove the factory RAM modules
[* black] Remove the rubber stabilisers on each side of the RAM modules.
[* black] Press down the spring clips on either end of the RAM modules. The module will then 'pop' out, then you can remove it.
[* black] Put the new module in at an angle to the RAM socket (firmly inserted so it's snug), then push it back into the clip until you hear a satisfying click.