Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Brendan Harkreader

Düzenleme onaylandı tarafından Brendan Harkreader

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] Follow the steps leading up to the actual battery removal, but do not actually remove the battery.
-[* red] Start by locating and removing the two 3/32" screws that attach the motherboard to the battery compartment using a J00 phillips screwdriver.
-[* orange] Once the screws are removed, Use your fingers or a pair of tweezers to remove the clip holding the ribbon connector in place. The connector is indicated with an orange marker.
+[* red] Locate and remove the two 3/32" screws that attach the motherboard to the battery compartment using a J00 screwdriver.
+[* orange] Use your fingers or a pair of tweezers to remove the clip holding the ribbon connector in place. The connector is indicated with an orange marker.
[* icon_caution] Be sure not to apply excessive force on the ribbon connector, as it can break.
[* yellow] Find the speaker connector, indicated by a yellow circle, and using your fingers disconnect it.