Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove two 2.5mm Japanese Industrial Standard (J) screws with the J00 bit located on the small circuit board in view.
+[* red] Remove two 2.5mm JIS #00 located on the small circuit board in view.
[* black] Use the Jimmy to remove the board after the screws have been removed.
[* icon_caution] Be careful not to crease or damage the ribbon cable.