Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Austin Blakely

Düzenleme onaylandı tarafından Austin Blakely

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the 4 4mm screws with a #00 Philips head screwdriver. holding the back to the display assembly.
-[* orange] Remove the 2 3mm screws with a #00 Philips head screwdriver. holding the back cover to the display assembly.
+[* red] Remove the four 4 mm screws holding the back to the display assembly with a Philips #00 screwdriver.
+[* orange] Remove the two 3mm screws holding the back cover to the display assembly with a Philips #00 screwdriver.
[* icon_caution] Lay the cover on the workspace carefully as not to damage the wires still connected to it.