3. Adımdaki Değişiklikler
Düzenleyen: Caleb Mink —
Düzenleme onaylandı tarafından Caleb Mink
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Using #1 Phillips screwdriver, remove the two screws at the bottom of the display panel. |
|---|---|
| + | [* black] Using #1 Phillips screwdriver, remove the two 3mm screws at the bottom of the display panel. |
| [* icon_note] Lift slightly from the top, then pull outwards. | |
| [* black] Flip the display panel around to find a ribbon cable near the center of the bottom of the panel. This cable will have some orange tape wrapped around the connector. Once removed the ribbon cable will simply pull out of the connector. |