Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Nathaniel Evans

Düzenleme onaylandı tarafından Nathaniel Evans

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Place laptop upside down with the hinge facing you, then unscrew the two 9mm Phillips head screws located in the center of the rear panel. Remove the rear panel by using the pry tool to separate it from the back of the laptop.
+[* red] Place laptop upside down with the hinge facing you, then unscrew the two 9mm Phillips head screws located in the center of the rear panel. Remove the rear panel by using the pry tool to separate it from the back of the laptop.