2. Adımdaki Değişiklikler
Düzenleyen: Schyler Sapinski —
Düzenleme onaylandı tarafından Schyler Sapinski
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* orange] Pull out the two plugs by pulling down until they become disconnected. | |
| - | [* yellow] Unscrew the yellow marked screws with the TR6 screwdriver bit. |
| + | [* yellow] Unscrew the yellow marked screws with the 4mm TR6 screwdriver bit. |
| [* green] Detach the ribbon from the circuit board by pulling away from the board. | |
| - | [* red] Unscrew the red marked screws with the J1 screwdriver bit. |
| + | [* red] Unscrew the red marked 4mm screws with the J1 screwdriver bit. |
| [* black] The board should now be able to be removed. |