2. Adımdaki Değişiklikler
Düzenleyen: Austin Blakely —
Düzenleme onaylandı tarafından Austin Blakely
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Using a gentle but sharp edged tool, place pressure around the border of the front assembly piece and move around the perimeter of the phone, placing pressure in the crack until the front Assembly piece separates from the rest of the phone. |
|---|---|
| + | [* icon_note] It may help to apply heat to the back cover using either a heat gun or an iOpener before starting to remove the cover. |
| + | [* black] Use a plastic opening pick to pry into the crease between the back cover and the midframe of the phone. |
| + | [* black] Move all the way around the phone until the back cover is separated from the rest of the phone. |
| + | [* icon_caution] The images show a metal spudger being used to pry open the back cover. However, this process is not recommended, as it poses a puncture risk to the battery. |