Google Pixel 4a Screen Replacement 1 No'lu Adım Geçmişi

	[title] Precautionary notes
	[* icon_note] You will need to pry the screen up to remove it from the phone. Read the following notes carefully before proceeding.
	[* black] Take note of the two seams on the edge of the phone:
-	[* ~~red~~] ''Screen seam:'' This seam separates the screen from the rest of the phone. *This is where you should pry*.
-	[* ~~orange~~] ''Frame seam:'' This is where the plastic frame meets the back cover. It is held in place by screws. *Do not pry at this seam*.
+	[* orange] ''Screen seam:'' This seam separates the screen from the rest of the phone. *This is where you should pry*.
+	[* red] ''Frame seam:'' This is where the plastic frame meets the back cover. It is held in place by screws. *Do not pry at this seam*.
	[* black] Before you begin, note the following areas on the screen:
	[* yellow] ''Screen flex cable:'' Do not insert the opening pick deeper than instructed or you risk damaging this cable.
-	[* icon_caution] Note the orange ribbon cable under the lower-~~right~~ corner of the screen, which is susceptible to damage if your opening pick is pressed into it. *Only insert your opening pick as little as is necessary to separate the screen adhesive.*
+	[* icon_caution] Note the orange ribbon cable under the lower-left corner of the screen, which is susceptible to damage if your opening pick is pressed into it. *Only insert your opening pick as little as is necessary to separate the screen adhesive.*
	[* green] ''Adhesive perimeter:'' Prying beyond this narrow perimeter without angling the pick will damage the OLED panel.