Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Sam Omiotek

Düzenleme onaylandı tarafından Sam Omiotek

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Insert an opening pick
-[* black] Place a suction cup near the right edge of the screen.
+[* icon_note] If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.
+[* black] Place a suction cup as close to the right edge of the screen as possible.
[* black] Lift the suction cup with a strong steady force.
-[* black] Insert the tip of an opening pick into the gap ***no more than 1 mm.***
+[* black] Insert the tip of an opening pick into the ''screen seam'' ***no more than 1 mm.***