How to Unclog a Prusa i3 MK3 Nozzle 10 No'lu Adım Geçmişi

-	[* black] reattached heatsink thread
-	[* black] re-screw nozzle
-	[* black] tightened heatsink thread
-	[* black] tighten nozzle, leave a gap between nozzle and heatblock
+	[* icon_caution] Set the nozzle temperature to 285 degrees celsius for the heatblock to expand and grip it with a wrench
+	[* black] Gently reattach the heatsink thread with your pliers, leave some slack so that it is not flush with the heatblock
+	[* black] re-screw the cleaned nozzle but leave a gap between the nozzle and heatblock
+	[* black] screw the heatsink thread until it is flush with the heatblock
+	[* black] Tighten the nozzle once again until you feel the that the nozzle's thread is touching the heatsink thread to ensure that filament does not build up in the heatblock threads.