7. Adımdaki Değişiklikler
Düzenleyen: Carsten Frauenheim —
Düzenleme onaylandı tarafından Carsten Frauenheim
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Desolder the two wires |
|---|---|
| + | [* black] Use a soldering iron to [guide|750|desolder|new_window=true] the red wire in the corner of the disc drive circuit board. |
| + | [* black] Then, desolder the adjacent black wire. Use a pair of blunt tweezers to hold and pull away the wires from the circuit board. |
| + | [* icon_caution] Follow general soldering safety guidelines such as wearing eye protection, working in a well-ventilated area, and washing your hands with soap and water after soldering. |
| + | [* icon_caution] Excessive heat may damage electrical components. Don't apply the soldering iron to the board for long periods of time. |
| + | [* icon_reminder] When you install the original circuit board into the replacement disc drive, solder the red wire to the solder pad labeled ***R***. Solder the black wire to the solder pad labeled ***B***. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi