11. Adımdaki Değişiklikler
Düzenleyen: Adriana Zwink —
Düzenleme onaylandı tarafından Adriana Zwink
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Insert the probe into the housing where the clickpad was previously to release the upper plastic clip of the back button. Carefully press against the clip from the inside. |
|---|---|
| - | [* icon_caution] Make sure that the probe doesn't hit any components and is inserted horizontally. |
| + | [* black] Insert the probe into the housing where the clickpad was previously to release the upper plastic clip of the back button. |
| + | [* black] Carefully press against the clip from the inside. |
| + | [* icon_caution] Make sure that the probe doesn't hit any components on the mainboard and is inserted horizontally. |