Eşyalarını Tamir Et Topluluk Mağaza

17. Adımdaki Değişiklikler

Düzenleyen: Adriana Zwink —

Düzenleme onaylandı tarafından Adriana Zwink

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Push the internal frame slightly out of the housing
[* black] Turn the remote upside down.
- [* icon_note] This will avoid the power button to fall into the case and get jammed.
-[* black] Insert the flat side of a spudger into the charging port.
- [* icon_note] No worries, this will not damage the port.
-[* black] Push the spudger in to slide the inside of the remote about 1 inch (2.5 cm) upwards.
- [* icon_caution] Don't try to push out the entire inside of the remote! The power button has be removed first.
+ [* icon_note] This will avoid the power button falling into the case and getting jammed.
+[* black] Insert the flat end of a spudger into the charging port.
+ [* icon_note] Don't worry! This won't damage the port.
+[* black] Push the spudger in to slide the insides of the remote out about 1 inch (2.5 cm).
+ [* icon_caution] Don't try to push it all out yet! The power button needs to be removed first.