Bu Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Unclip the mouse case |
|---|---|
| + | [* icon_note] There are clips all around the perimeter of the mouse case holding the two halves together. It is easiest to pull them apart starting at the back of the mouse. |
| + | [* icon_caution] Don't completely separate the two halves yet—they're still tethered together by a delicate cable. |
| + | [* black] Grasp the mouse case at the back and pull the two halves apart slightly, so there's a gap at the back of the mouse. |
| + | [* black] Move one hand toward the front of the mouse and continue pulling the two halves straight apart. |
| + | [* black] As you reach the front of the mouse you will need to slide the base toward the front of the mouse (down in the photos) so that the two halves clear each other. |
| + | [* black] Some of the clips are particularly stubborn and may require some force to pull apart. Apply steady, slowly increasing pressure to force the halves away from each other. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi