Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Mekenzie Griffin

Düzenleme onaylandı tarafından Evan Noronha

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert plastic opening tool into center of the edge as shown in first picture.
-[* black] Slide plastic opening tool along central gap of device, making sure that each edge is free as shown in the second picture.
+[* black] Insert the plastic opening tool into the center of the edge as shown in first picture.
+[* black] Slide the plastic opening tool along the central gap of device, making sure that each edge is free, as shown in the second picture.