Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Richard

Düzenleme onaylandı tarafından Richard

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert your new propellers into the hole closer to centre of the motor.
[* icon_note] This also applies for the second propeller on the same motor. Refer to the second image.
[* icon_reminder] You may replace the screw if needed as well, if the previous screw is damaged.
-[* icon_caution] Make sure you know which propeller goes where, this is important as a wrong placement can mess up your drone's flight.
+[* icon_note] Make sure you know which propeller goes where. This is important as a wrong placement can cause unstable flight.