4. Adımdaki Değişiklikler
Düzenleyen: Kris Rodriguez —
Düzenleme onaylandı tarafından Kris Rodriguez
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Detach Wires from Base | |
| - | [* |
| + | [* icon_note] The tone arm is still connected to the base of the turntable by several wires. |
| [* black] The audio cables from the tone arm pass through a plastic stress relief collar where they exit the case. Pull this stress relief collar out of its slot in the case bottom. | |
| [* black] Remove the screw securing the grounding wire to the large circuit board. Put the screw back in the hole in the circuit board, so it doesn't get lost. | |
| [* black] After detaching these wires, the tone arm assembly comes free from the base of the turntable. |