2. Adımdaki Değişiklikler
Adım Satırları
| + | [* black] Next, remove the motherboard. Measure the diode value of the battery connector with the multimeter. The diode value is 314, which is normal. |
|---|---|
| + | [* black] Then we put the motherboard on the thermal imager. Connect the motherboard with a power cable. Areas around the NAND are getting hot seriously. Since NAND is not on the main power supply circuit, we need to separate the motherboard for further testing. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi