2. Adımdaki Değişiklikler
Düzenleyen: Jed Porter —
Düzenleme onaylandı tarafından Jed Porter
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Locate the sensor off the exhaust header and follow the wire up to the connector. | |
| - | [* black] Gently work the connector out of the bracket, then disconnect it by pressing the tab inward and pulling out. |
| + | [* black] ***Caution:*** Some of the pieces on the top front of the engine are sharp. Be careful what you lean on. |
| + | [* black] ++Gently work the connector++ out of the bracket, then disconnect it by pressing the tab inward and pulling out. |
| + | [* black] ***Reminder:*** Plastic gets brittle over time. Be gentle and go slow. If it's not coming out, take a 5 minute break, and come back. Be patient. |