5. Adımdaki Değişiklikler
Düzenleyen: Jacob Matos —
Düzenleme onaylandı tarafından Jacob Matos
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Flip the drone over so that it is right-side up. |
|---|---|
| + | [* black] Flip the drone over so that it is right-side up. Then, use a soldering kit to remove the black, red, and white cables from the logic board. |
| + | [* icon_note] Trace the black, red, and white wires to make sure they are the wires connected to the drone arm you are replacing. |
| + | [* icon_note] If new to soldering, a helpful guide can be found at [[Topic:Soldering|Soldering Skills]]. |