2. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] X Axis Disassembly | |
| [* black] Remove the belt by unhooking it from the bottom if the X carriage plate and pulling it out. | |
| [* black] To gain access to the M3 screws for the X stepper remove the QR sticker. | |
| + | [* black] Disconnect the stepper motor and endstop cables. |
| [* black] Remove the 4x M3x40 countersunk screws using a 2mm allen wrench. Remove the X stepper cover and stepper motor. | |
| - | [* black] Disconnect the stepper motor and endstop cables. |
| [* black] Remove the X carriage plate by using a 10mm wrench to loosen the eccentric nut on the bottom of plate and slide it off the 2020 extrusion |