4. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Z Axis Disassembly | |
| [* black] Disconnect the Z stepper cable. | |
| [* red] Remove the leadscrew by loosening the bottom M3 screw with a 2.5mm allen wrench. | |
| [* orange] Remove the stepper motor and mount by removing the 2x M4x18 countersunk screws with a 3mm allen wrench. | |
| [* yellow] Loosen both eccentric nuts. | |
| - | [* green] To remove the left Z axis plate remove the 3x |
| + | [* green] To remove the left Z axis plate remove the 3x M5x40 button head screws and 2x M5 locknuts to separate the Z brackets. |
| [* light_blue] Remove the 2x M4x16 button head screws with a 2.5mm allen wrench to remove the Z bracket off the 2020 extrusion. | |
| [* black] On the right side bracket remove the remaining M4x16 button head screw with a 2.5mm allen wrench to separate the right Z axis plate from the 2020 extrusion. |